BIS Certification for Drywall Screws – Complete Guide to IS 18507:2024
BIS certification for Drywall Screws ensures that fasteners used in gypsum board installations meet strength, corrosion resistance, and dimensional accuracy requirements as defined under IS 18507:2024. In India, this certification is essential to guarantee structural reliability, prevent installation failures, and enable legal sale in regulated markets.
Drywall screws may appear like small hardware components, but they play a critical role in modern construction systems. Whether it's residential interiors, commercial partitioning, or modular structures, drywall screws are responsible for holding gypsum boards securely onto metal or wooden frames. A slight compromise in their strength, threading, or coating can result in loose panels, cracks, or even structural instability over time.
In India's rapidly growing construction sector, the demand for drywall systems has increased significantly due to their speed, cost efficiency, and clean finish. However, this also raises concerns about the quality of fastening components used in these systems. Poor-quality screws can corrode quickly, strip during installation, or fail under load.
To address these concerns, regulatory oversight has been introduced through BIS Certification for Drywall Screws under IS 18507:2024. This ensures that every screw used in drywall installations meets defined mechanical and chemical standards.
For manufacturers, importers, and distributors, obtaining a BIS Certificate for Drywall Screws is not just about compliance—it is about ensuring that their product performs reliably in real-world construction environments.
Also read the QCO Notification for Drywall Screws – Specification
Understanding BIS Certification for Drywall Screws
When it comes to drywall screws, certification is not merely about labeling—it is about verifying that each screw can withstand installation stress, maintain grip strength, and resist environmental degradation over time.
Unlike general fasteners, drywall screws are specifically engineered for:
- Penetrating gypsum boards without cracking them
- Anchoring firmly into metal or wooden studs
- Maintaining hold without loosening due to vibration or load
The BIS Certification for Drywall Screws evaluates these characteristics through standardized testing and inspection procedures. It ensures that the screws:
- Have consistent thread design for proper grip
- Exhibit adequate tensile strength
- Are coated properly to prevent rusting
- Maintain dimensional precision
From a regulatory standpoint, BIS certification acts as a quality checkpoint before the product reaches construction sites. It ensures that builders, contractors, and end users are not exposed to substandard fastening materials that could compromise structural integrity.
Check complete details about documentation, cost, and process etc.
Applicable BIS Standard for Drywall Screws
IS 18507:2024
The Indian Standard IS 18507:2024 is specifically developed to regulate drywall screws used in construction and interior applications.
Scope of the Standard
This standard defines:
- Mechanical properties of drywall screws
- Dimensional specifications such as length, diameter, and thread pitch
- Coating requirements for corrosion resistance
- Performance benchmarks under load conditions
Product Coverage
IS 18507:2024 applies to:
- Self-tapping drywall screws
- Fine thread and coarse thread screws
- Screws used for metal and wooden framing
Performance Objectives
The standard focuses on ensuring that drywall screws:
- Do not break or deform during installation
- Provide consistent holding strength
- Resist corrosion in humid environments
- Maintain thread integrity during usage
Design and Testing Principles
The standard incorporates testing methodologies that simulate real-life installation conditions, such as:
- Torque resistance testing
- Pull-out strength evaluation
- Coating adhesion testing
By aligning with IS 18507:2024, manufacturers demonstrate that their product is suitable for India's construction requirements and environmental conditions.
Conclusion
Drywall screws are small components with a significant impact on construction safety and durability. Ensuring their quality is not optional—it is essential for reliable building performance. The BIS Certification for Drywall Screws under IS 18507:2024 provides a structured framework to verify that these fasteners meet required standards.
For manufacturers and importers, obtaining a BIS License for Drywall Screws is a strategic step toward regulatory compliance, market acceptance, and long-term business growth. By adhering to BIS requirements, businesses not only meet legal obligations but also contribute to safer and more dependable construction practices across India.
FAQs – BIS Certification for Drywall Screws
1. What is the cost of BIS certification for Drywall Screws?
The BIS certification cost for Drywall Screws depends on testing, inspection, and application fees. It varies based on product variants and manufacturing complexity.
2. How long does the BIS certification process take?
The BIS certification process for Drywall Screws typically takes 4–8 weeks, depending on testing timelines and documentation accuracy.
3. Is BIS certification mandatory for all drywall screws?
Yes, if covered under IS 18507:2024, certification is required for legal sale in India.
4. What tests are conducted for drywall screws?
Tests include tensile strength, torque resistance, pull-out strength, and corrosion resistance.
5. Can foreign manufacturers apply for BIS certification?
Yes, through the Foreign Manufacturers Certification Scheme (FMCS).
6. What documents are required for BIS certification?
Documents include factory registration, product specifications, test reports, and quality manuals.
7. What happens if my product fails testing?
You must improve the product quality and reapply for testing.
8. Is factory inspection mandatory?
Yes, BIS conducts inspections to verify manufacturing and quality control systems.
9. Can one license cover multiple screw sizes?
Yes, if they fall under the same product category and standard.
10. What is the validity of the BIS license?
Typically, it is granted for a specific period and requires renewal.
Check complete details about documentation, cost, and process for foreign manufacturers
Check complete details about documentation, cost, and process for Indian manufacturers
Many of our users also read
This compliance advisory was vetted by our Senior Consultant (Enforcement & Vigilance), a former BIS Director (Enforcement). He specializes in post-certification compliance, helping companies navigate surveillance audits and legal adherence to BIS mandates.
Dhruv Aggarwal
Head of Operations at Sun Certifications India
Experience: 10+ years & Handled 1000+ projects
Awarded by many Indian and International organisations
PT Quty Karunia, BIS Licensee in Vietnam
“Sun Certifications India provided excellent BIS Certification services. Their unparalleled service and sincerity gained our trust. One of the best BIS consultants in India!”
Thantawan Industries Ltd, BIS Licensee in Thailand
“Sun Certifications India supported us throughout the BIS certification process. Their responsive customer service and punctuality are exceptional. Highly recommend for hassle-free BIS certification.”
Leaderart Industries, BIS Licensee in Malaysia
“Sun Certifications India helped us acquire BIS Certification, doubling our engagement in India. Their services are fast, genuine, and up-to-date with latest BIS norms.”
Aluminium Bahrain (ALBA), BIS Licensee in Bahrain
“Excellent BIS certification support, highly reliable consultants.”
Bahrain Aluminium Manufacturing Company, BIS Licensee in Bahrain
“Smooth BIS registration process with expert consultants.”
Daiki Aluminium Japan, BIS Licensee in Japan
“Efficient BIS license assistance, great consultants.”
Honeywell, BIS Licensee in USA
“Professional BIS certificate guidance, very satisfied.”
Trimble Navigation, BIS Licensee in USA
“Seamless BIS certification and registration support.”
Remsa Italia, BIS Licensee in Italy
“Helpful BIS consultants, simplified license process.”
Aquazzura, BIS Licensee in Italy
“We got our BIS certificate well within the timelines and at affordable prices, great work team Sun!”
PT Quty, BIS Licensee in Indonesia
“Excellent BIS registration service, highly recommended.”
Danu Vina, BIS Licensee in Vietnam
“Reliable BIS license consultants, fast process.”
Hanh My Production Company, BIS Licensee in Vietnam
“Expert BIS consultants, certification made easy.”
Sedo Vina, BIS Licensee in Vietnam
“Smooth BIS certificate registration, great support.”
Misumi Japan, BIS Licensee in Japan
“Trusted BIS consultants, quick certification process.”
Thantawan Public Industry Company, BIS Licensee in Thailand
“Professional BIS certification service, very efficient.”
Cortizo Aluminios, BIS Licensee in Spain
“Excellent BIS registration and license guidance.”
Midal Cables, BIS Licensee in Bahrain
“Expert BIS consultants, smooth certification process.”
Nobilia Kitchens, BIS Licensee in Bahrain
“Reliable BIS certificate registration support.”
Years Exp.
Our Clients
Success Rate
Countries Served
Our team brings 10e4+ years of experience in CDSCO and BIS compliance.
We reduce approval time by up to 40% with streamlined processes.
100% success rate with 1500+ successful registrations.
Dedicated account manager ensuring personalized service.
Leave your details below and our experts will call you back within 24 hours to discuss your regulatory compliance needs.
By submitting this form, you agree to our Privacy Policy and consent to being contacted.
